Rode Wireless GO (Gen 3) Clay Wireless Microphone System, 32-bit Float

Rode Wireless GO (Gen 3) Clay: Warm, Earthy Colour With Professional Guts

The Rode Wireless GO (Gen 3) is a dual-channel compact wireless microphone system with 32-bit float recording, and Rode's Series IV 2.4 GHz digital transmission. Clay is a warm, earthy tone — a softer, more organic alternative to black for creators who want their kit to feel handmade rather than clinical. The technology inside is pure Rode: two clip-on transmitters mic two people at once, each recording a 32-bit float backup, while GainAssist keeps levels even and the receiver feeds any camera or phone. Warm on the outside, precise on the inside.

Two Transmitters, One Receiver, Every Voice in Your Story

The Wireless GO (Gen 3) is a dual-channel system: two miniature clip-on transmitters pair with a single receiver, letting you record two people on separate channels at the same time. Rode's Series IV 2.4 GHz digital transmission, wrapped in 128-bit encryption and a near-zero-latency codec, holds that connection steady out to 853 ft (260 m) line of sight — far enough to leave the camera on a tripod and let your subjects move naturally through a scene.

Record First, Worry Later: 32-Bit Float On Board

Every transmitter is also a recorder. As you shoot, each one lays down a 32-bit float backup to 32 GB of internal memory, enough for up to 40 hours of audio. Because 32-bit float captures an enormous dynamic range, audio that clipped when someone shouted or dropped too low when they mumbled can be recovered cleanly in the edit. You stop babysitting your meters and start paying attention to the moment in front of you.

Clean Levels Automatically, Plus Room for Your Own Lavaliers

Intelligent GainAssist balances levels on the fly, and a safety channel keeps a lower-level copy in reserve for unexpected peaks. The built-in mics inherit the Wireless PRO's upgraded capsules and preamps for a more natural, lower-noise voice, while a 3.5mm locking input on each transmitter — with automatic plug-in power detect — lets you clip on a discreet lavalier when the shot calls for a hidden mic.

Camera, Smartphone, Computer, or No Receiver at All

The receiver offers both a 3.5mm analog output and a USB-C digital output, so the system is equally at home on a camera, a phone, or a computer used as a USB mic. Prefer to travel light? Direct Connect pairs a transmitter straight to an iOS phone over Bluetooth through the Rode Capture app, leaving the receiver in the bag. Everything configures in the free Rode Central app on desktop or mobile.

For the Creator Who Likes a Warmer Palette

The Clay Wireless GO (Gen 3) is for lifestyle vloggers, interviewers, and creators drawn to warm, earthy tones over stark black. First-timers get effortless, automatic clean sound; upgraders get 32-bit float protection, longer range, and the flexibility of lavalier inputs and receiver-free Bluetooth. If your visual style leans warm and natural, clay completes the look.