Moss Finish, Dual-Channel 2.4 GHz Wireless System, Two Clip-On Transmitter/Recorders, 32-bit Float On-Board Recording, 32 GB Per Transmitter, Up to 40 Hours Backup, 853 ft (260 m) Range, Intelligent GainAssist, Safety Channel, Wireless PRO Capsules, 3.5mm Locking Lavalier Inputs, 3.5mm Analog + USB-C Outputs, Bluetooth Direct Connect, Up to 7-Hour Battery, LCD Display
The Rode Wireless GO (Gen 3) is a dual-channel compact wireless microphone system with 32-bit float recording, writing a 32-bit float backup to 32 GB per transmitter. Moss is a deep, muted green for creators who want a natural, low-key finish that suits documentary and location work. The system beneath it is anything but low-key: two transmitters capture two subjects on independent channels, back up every word in 32-bit float, and level themselves automatically so you can focus on the interview, not the meters. It is calm on the outside and relentless on the inside.
The Wireless GO (Gen 3) is a dual-channel system: two miniature clip-on transmitters pair with a single receiver, letting you record two people on separate channels at the same time. Rode's Series IV 2.4 GHz digital transmission, wrapped in 128-bit encryption and a near-zero-latency codec, holds that connection steady out to 853 ft (260 m) line of sight — far enough to leave the camera on a tripod and let your subjects move naturally through a scene.
Every transmitter is also a recorder. As you shoot, each one lays down a 32-bit float backup to 32 GB of internal memory, enough for up to 40 hours of audio. Because 32-bit float captures an enormous dynamic range, audio that clipped when someone shouted or dropped too low when they mumbled can be recovered cleanly in the edit. You stop babysitting your meters and start paying attention to the moment in front of you.
Intelligent GainAssist balances levels on the fly, and a safety channel keeps a lower-level copy in reserve for unexpected peaks. The built-in mics inherit the Wireless PRO's upgraded capsules and preamps for a more natural, lower-noise voice, while a 3.5mm locking input on each transmitter — with automatic plug-in power detect — lets you clip on a discreet lavalier when the shot calls for a hidden mic.
The receiver offers both a 3.5mm analog output and a USB-C digital output, so the system is equally at home on a camera, a phone, or a computer used as a USB mic. Prefer to travel light? Direct Connect pairs a transmitter straight to an iOS phone over Bluetooth through the Rode Capture app, leaving the receiver in the bag. Everything configures in the free Rode Central app on desktop or mobile.
Moss suits documentary filmmakers, field journalists, and creators whose work takes them into real-world environments. Newcomers benefit from menu-free setup and GainAssist; veterans rely on the 32-bit float safety net, the safety channel, and locking lavalier inputs for hidden-mic setups. When your shoots happen out in the world, an earthy moss finish disappears into the scene.
| MPN | WIGOGEN3MOS |
|---|---|
| Color | Green |
| UPC / EAN | 698813016761 |
| Brand | Rode |
| Product Condition | New |
| Availability | In Stock |
| Type | Dual-channel 2.4 GHz digital wireless microphone system |
| Transmission | Rode Series IV 2.4 GHz digital, 128-bit encryption |
| Operating Range | Up to 853 ft (260 m) line of sight |
| On-Board Recording | 32-bit float, 32 GB per transmitter (up to 40 hours) |
| Battery Life | Up to 7 hours per charge (approx. 2-hour recharge) |
| Built-in Microphone | Omnidirectional condenser (Wireless PRO capsule) |
| Microphone Input | 3.5mm TRS locking, one per transmitter |
| Outputs | 3.5mm analog (TRS) and USB-C digital |
| Level Management | Intelligent GainAssist, output gain control, safety channel |
| Monitoring | Headphone output with on-board level control |
| Wireless Direct Connect | Bluetooth to iOS via Rode Capture app (no receiver) |
| Configuration | Rode Central (desktop and mobile) |
| Compatibility | Cameras, smartphones, computers; Rode Series IV devices |
| Made In | Sydney, Australia |