|
Rode XLR Cable 3m Blue - Premium Balanced Microphone Cable
was
$49.00
Special Price
$39.00
Premium Balanced XLR Microphone Cable, 3-Pin XLR Male-to-Female Connectors, 10 ft (3 m) Length, Blue Colourway, Professional-Grade Shielded Cable, Rugged Strain-Relief Connectors, Extremely Low Noise, High Common-Mode Rejection, Colour-Coded Signal-Chain Identification, Standard XLR Device Compatibility
Availability:
In Stock
SKU
XLR CABLE-3M-BLUE
All RØDE products are warranted for one year from date of purchase. If you purchased your microphone from us then you may be able to extend your warranty to two years, five years, ten years or lifetime (depending on the model) by registering the details of your purchase with Rode.
Rode XLR Cable 3m Blue Features:
- PREMIUM BALANCED SIGNAL: A three-conductor design cancels hum and interference so your microphone reaches the preamp clean and quiet.
- THREE-PIN XLR, MALE TO FEMALE: The female end plugs onto the microphone and the male end into your mixer, interface, or recorder.
- TEN-FOOT REACH: 10 ft (3 m) suits a podcast desk, streaming rig, or home studio where the source sits close to your gear.
- COLOUR-CODE YOUR CHAIN: Assign blue to a specific mic or input and trace it instantly against a rig of black gear.
- ROAD-READY BUILD: Rugged connectors and strain-relief sleeves protect the solder joints where lesser cables fail first.
- ULTRA-CLEAN TRANSFER: Professional-grade shielded cabling keeps the noise floor low from end to end.
Rode XLR Cable 3m in Blue: A Clean Balanced Run You Can Trace at a Glance
The Rode XLR Cable 3m in blue is a premium balanced XLR microphone cable, 10 ft (3 m) long with 3-pin male-to-female connectors. Its 3-pin male-to-female connectors drop into any XLR chain, and its blue jacket makes this the run you can pick out of a bundle of black cables instantly. It is the small change that makes patching feel effortless.
How a Balanced XLR Connection Stays Dead Quiet
The reason a balanced XLR connection sounds so clean comes down to how it treats interference. The cable carries the signal on a pair of conductors as two mirror-image copies, one flipped in polarity, wrapped in a shield. At the input the flipped copy is inverted again and the two are combined, and electrical noise picked up equally on both wires cancels in that final sum. The result is a signal that arrives at your interface as quiet as it left the microphone, even near lights, power, and other gear.
Blue That Tells One Channel From the Next
Reach for blue when you want a run you can trace instantly. Against a sea of black gear and cabling, a blue XLR jumps out, so you always know which line carries which microphone. It is a natural fit for colour-coded setups like the RODECaster Pro II, where matching a cable to its channel means you patch the right input every time and troubleshoot in seconds instead of minutes. Assign blue to a co-host, a guest, or your second input and never guess again.
Built to Last, Ready to Work
A cable is only as good as the day it stops working, and this one is engineered against that day. Professional-grade shielded cable is fitted with tough, road-ready connectors and strain-relief sleeves that take the strain off the internal solder joints every time you coil it or pull it from a socket. Built to exacting tolerances, it shrugs off the repeated flexing and plugging that ends the life of lesser cables. At 10 ft (3 m) it is ideal for connecting a microphone to an interface, mixer, or recorder at a podcast desk, a streaming rig, or a home studio, and it is the right length for near-field placement where the source sits close to your gear. For anyone building a clean, reliable signal chain, it is the dependable link between mic and preamp.
| MPN | XLR3MB |
|---|---|
| Color | Blue |
| UPC / EAN | 698813009954 |
| Brand | Rode |
| Product Condition | New |
| Availability | In Stock |
Rode XLR Cable 3m Blue Specifications
| Type | Premium Balanced Microphone Cable |
| Connectors | 3-Pin XLR Male to 3-Pin XLR Female |
| Length | 10 ft (3 m) |
| Signal Configuration | Balanced (3-conductor) |
| Cable | Professional-grade shielded |
| Connector Build | Rugged connectors with strain-relief sleeves |
| Noise Performance | Extremely low noise, high common-mode rejection |
| Compatibility | Any device with a standard 3-pin XLR connection |