Rohn 25G90R080 25G Complete 80 FT Guyed Tower

80-Foot Guyed Tower System for Light-Duty Antenna Installations
The Rohn 25G90R080 is a complete 80-foot guyed tower kit engineered for light-duty communication applications in areas with moderate wind exposure. Built from the trusted Rohn 25G series, this system supports antenna loads up to 12.6 square feet and is rated for 90 mph 3-second gusts with no ice. Whether you’re setting up a WISP link, amateur radio station, or remote monitoring system, this tower provides the structural support needed to get your antennas in the air and functioning dependably.

Reliable Tubular Steel Construction with Cross Bracing
Each 10-foot section is made from tubular steel and reinforced with solid-rod bracing configured in a zigzag pattern. This design increases torsional rigidity and distributes load stresses evenly across the structure. The 25G series has a long-standing reputation in the field for balancing lightweight materials with reliable strength, making it ideal for installations where portability and performance are equally important.

Built to Handle 90 MPH Wind Speeds with No Ice Load
Engineered to withstand wind gusts up to 90 mph, this tower can handle harsh conditions when properly guyed. The 12.6 square foot maximum antenna capacity makes it suitable for directional antennas, microwave dishes, or smaller arrays used in remote communications or broadcasting. For guyed configurations, a 25G tower can safely rise to heights up to 190 feet, providing flexibility for future expansion.

Comprehensive Tower Package for Easy Installation
This package includes genuine Rohn components and essential hardware to complete your installation. The kit features tower sections, a fixed base, guy wire, anchor rods, clamps, turnbuckles, grounding kits compliant with TIA Revision F, and a tapered top section for antenna mounting. Concrete, erection tools, and safety equipment are not included and should be supplied by experienced personnel.

Hot-Dip Galvanized Finish for Corrosion Resistance
All steel components are hot-dip galvanized after fabrication to provide complete protection from rust and environmental wear. This process ensures long-term durability in outdoor conditions—especially important in coastal, humid, or freeze-thaw climates. A properly installed 25G tower with galvanized protection can provide years of reliable service with minimal maintenance.

Modular Tower Sections Simplify Transport and Handling
With a structure composed of eight 10-foot modular sections, the Rohn 25G90R080 is easy to ship, move, and assemble on-site. The double-bolt joint system ensures secure alignment and minimizes movement between sections. This design not only enhances structural integrity but also makes inspections and section replacements more manageable over time.

Ideal for Amateur Radio, WISP Networks, and Remote Sites
This tower is a go-to solution for professionals and hobbyists looking for a balance between height, cost, and durability. It’s widely used in ham radio, rural broadband deployments, utility telemetry, and other light-duty communication systems where consistent signal strength and wind performance are crucial.