Rohn 55BRKT050 55G G-Series Bracketed Tower Kit

50 Foot Bracketed Tower Kit for Strong and Stable Equipment Mounting
The Rohn 55BRKT050 is a 50-foot bracketed tower system built for applications requiring vertical mounting of antennas, cameras, and communication hardware where a structure provides partial support. This system leverages Rohn’s rugged 55G tower series, designed for permanent outdoor use in commercial, municipal, and industrial environments. It delivers high wind-load performance while maintaining a reduced ground footprint through structural bracketing.

High EPA Ratings for Heavy Wind and Equipment Loads
This bracketed tower configuration supports up to 72.4 square feet of effective projected area (EPA) at 70 MPH, 54.5 square feet at 80 MPH, and 41.8 square feet at 90 MPH with no ice. These wind ratings make the 55BRKT050 ideal for areas that face moderate to strong wind conditions and need to maintain structural stability for medium-to-heavy antenna systems. It’s the right fit for broadcast antennas, cellular equipment, and long-range wireless deployments.

Bracketed Design Anchors to Existing Structures
Unlike freestanding towers that require wide footprints and guy wires, the 55BRKT050 uses bracket mounts to connect securely to a nearby building, wall, or support surface. This approach adds lateral stability and reduces the space needed at ground level, making it suitable for installation in urban, rooftop, or confined facility locations. It’s a smart solution when zoning or space limitations prevent a full guyed or self-supporting tower.

Heavy-Duty Galvanized Steel Tower Sections Built to Last
Rohn 55G tower sections are fabricated with a 17-inch face width, using 1-1/2" outer diameter tubular legs and 7/16" solid round bracing formed in a zigzag pattern. Each section is hot-dip galvanized after fabrication to ensure protection from corrosion, rust, and environmental wear. This tower holds up in varied climates, including coastal, industrial, and inland zones, delivering long-term structural integrity in demanding conditions.

Modular System Allows Tower Growth and Accessory Integration
The 55BRKT050 is part of Rohn’s modular 55G tower series, so you can extend it upward with additional sections or accessorize with mounting brackets, lightning protection, cable ladders, or grounding kits. Its versatility ensures that as your system evolves, the tower can adapt without needing to be replaced. This modular design is particularly beneficial for growing surveillance systems, expanding wireless coverage, or upgrading telecom infrastructure.

Complete Tower Kit Designed for Code-Compliant Installations
This tower kit includes all required tower sections to reach 50 feet in height, including pre-drilled joints and the necessary hardware for secure assembly. Brackets, anchors, foundation, and guying components are sold separately and must be installed according to Rohn’s structural guidelines to ensure compliance with local codes and safety standards. The double-bolted joints between sections ensure precise alignment and stable load distribution.

Ideal for Wireless, Broadcast, and Public Infrastructure Projects
From two-way radio and point-to-point links to surveillance cameras and data antennas, the Rohn 55BRKT050 offers the strength and flexibility professionals need. It’s well suited for law enforcement, utilities, transportation hubs, and enterprise facilities seeking height without excessive real estate requirements.