Rohn Products VP3004555 45G/55G Tower 300FT Climbing Safety Cable System

300-Foot Climbing Safety System for Tower Access Compliance
The Rohn VP3004555 is a 300-foot climbing safety cable system designed to meet vertical fall protection requirements on 45G, 45GSR, and 55G tower structures. This system forms the core of the TUF TUG Safety System, delivering fixed-line fall protection using a solid core 3/8-inch cable that supports a compatible wire grab device (sold separately). Built to support safe vertical climbing in accordance with Rev. G standards, this kit offers tower crews a compliant, dependable solution for heights up to 300 feet.

Preconfigured Cable and Bracket System Streamlines Installation
This safety kit includes all required mounting hardware for installation—top and bottom anchor brackets, climbing cable, and intermediate cable restraints tailored to a 300-foot tower height. Designed specifically for fixed tower integration, it enables the safety cable to remain in place while allowing the climber to ascend or descend using an appropriate wire grab and harness system. The result is a permanent fall protection solution for routine climbs and emergency service access.

Designed for Compatibility with Fall Arrest Devices
The VP3004555 system is optimized for use with wire grab mechanisms such as the TT-WG-500 or similar devices engineered for 3/8-inch solid core cable. The safety grab device travels along the cable with the climber, locking instantly during sudden downward movement. While the grab device and harness are not included, this system is fully compatible with most industry-standard vertical fall arrest equipment.

Supports Safety Compliance on Tower Heights Over 10 Feet
Per Rev. G regulations and industry safety codes, any structure exceeding 10 feet in height must be equipped with a climber safety system. The VP3004555 satisfies this requirement by establishing a fixed vertical safety path for up to 300 feet, helping operators and maintenance personnel meet both OSHA standards and internal safety protocols.

Rugged Construction with Long-Term Weather Resistance
Built for exposure to outdoor tower environments, the system uses galvanized components that are engineered to resist corrosion and environmental degradation. Once installed, it provides a long-lasting safety measure for towers in all climates—ideal for broadcast, utility, wireless, or telemetry tower installations where worker safety is a top priority.

Engineered for 45G, 45GSR, and 55G Tower Series Structures
This kit is purpose-built to integrate with Rohn’s most common tower series—ensuring seamless fit and secure mounting. Whether your project uses 45G, 45GSR, or 55G tower sections, the VP3004555 system installs securely and provides a consistent climb assist and fall protection solution for tower professionals.

Essential for Safe Tower Work and Crew Access Compliance
From routine service checks to high-angle system upgrades, climbing towers without an installed fall protection system exposes workers to significant risk. This kit ensures your site stays compliant while helping climbers stay protected at every step of the vertical ascent.